[RE-wrenches] Roof flashings on L-feet in high snow load conditions

[toddcory at finestplanet.com]

the engineering called for 8" sch 80... and some super strong rebar in the base. i subbed out the mount so dont have all the details easily accessible... but if i recall, the hole is like 6' deep and 5 feet square. it seemed inadequate to me, but it was engineered, so i guess good to go.
 
todd
 
 
 
On Tuesday, November 13, 2012 4:57pm, "Ray Walters" <ray at solarray.com> said:


Thanks for the pitch info, very helpful.  Are you using a heavy wall     thickness on the pole?   I thought with DP &W we could only go 6     ft out of the ground without increasing the pole size or adding     bracing.

 Ray


On 11/13/2012 4:21 PM,       [mailto:toddcory at finestplanet.com] toddcory at finestplanet.com wrote:
 
ray,
 
this has           been a learn by trial and error learning experience. i know           12/12 is ok and 5/12 is not... so somewhere in between those           two pitch angles there is change.
 
the latest           pole mount i did was a dpw rack with 3 kW on an 8" pole. i am           attaching a 100 kb pix of this monster!
 
todd
 



Sent from Finest Planet WebMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20121113/16a0f7c2/attachment-0004.html>