[RE-wrenches] Battery Specialist

[bob ellison]

I wire them thru bus bars now, but in the past before I did that I used to move them around occasionally. 

 

Later,

Bob

 

From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of dan at foxfire-energy.com
Sent: Friday, August 31, 2012 6:54 PM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] Battery Specialist

 

Hi Guys, Seems my "Battery Specialist" is back. Yes, this is the same guy that convinced a few of my customers that most installers are clueless because we clean terminals with a wire brush instead of a razor blade (and don't believe in desulphators).  Now it seems he's telling folks that batteries should always be operated in the exact Sequence in which they were originally configured. i.e. #1 in the string should always be #1, #2 should always be #2 etc. I've been suggesting to folks (who still run multi string set ups) that they physically mix up their batteries periodically (at least once mid life cycle), to manually alter high resistance current paths. Call me old fashion, but I'm of the impression that only  Kirchhoff's Laws apply here. Am I missing something - again? Thanks db

 


Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120831/a071aa76/attachment-0004.html>