[RE-wrenches] Unirac SolarMount rail caps

[Chris Mason]

The SnapNRack ground mount rail system has end caps, we just installed them
on a project and they look great.

On Mon, Aug 13, 2012 at 9:24 AM, Mark Richardson <
MRichardson at newyorklightenergy.com> wrote:

>  We had to find end caps for a ground mount that was used as part of an
> environmental learning center.****
>
> I was able to get vinyl end caps that worked online from caplugs (
> http://www.caplugs.com/).****
>
> A little silicone to seal the deal…****
>
> ** **
>
> [image: Description: Description: Description: NYLElogo]****
>
> *Mark Richardson*
>
> mrichardson at newyorklightenergy.com****
>
> ** **
>
> *From:* re-wrenches-bounces at lists.re-wrenches.org [mailto:
> re-wrenches-bounces at lists.re-wrenches.org] *On Behalf Of *
> holtek at sbcglobal.net
> *Sent:* Saturday, August 11, 2012 10:05 AM
> *To:* RE-wrenches
>
> *Subject:* Re: [RE-wrenches] Unirac SolarMount rail caps****
>
>  ** **
>
> just throwing this out....aluminum angle attached to ends -  run between
> rail ends (each pair)? aluminum flat bar? closes ends and gives a trimmed
> look? Maybe use 24 or 22ga stainless than can be bent to form an angle? ask
> client to cover material cost as that is "custom" work beyond typical scope
> of build. ****
>
> Holt E. Kelly
> Holtek Fireplace & Solar Products
> 500 Jewell Dr.
> Waco TX. 76712
> 254-751-9111
> www.holteksolar.com****
>
>  ----- Original Message ----- ****
>
> *From:* Maverick Brown [Maverick Solar] <maverick at mavericksolar.com> ****
>
> *To:* 'RE-wrenches' <re-wrenches at lists.re-wrenches.org> ****
>
> *Sent:* Friday, August 10, 2012 6:56 PM****
>
> *Subject:* Re: [RE-wrenches] Unirac SolarMount rail caps****
>
> ** **
>
> For the Bee’s sake, just pump some grey silicone caulk into the ends and
> scrape flat.  ??****
>
> ** **
>
> *From:* re-wrenches-bounces at lists.re-wrenches.org
> [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On Behalf Of *Dana
> Brandt
> *Sent:* Friday, August 10, 2012 3:12 PM
> *To:* RE-wrenches
> *Subject:* [RE-wrenches] Unirac SolarMount rail caps****
>
> ** **
>
> We just finished installing a system on SolarMount and the client is
> unhappy with how the ends of the SolarMount rail look. She says it looks
> unfinished and is concerned about bees nesting in them. I know there are
> other rail products with more finished looking ends but this system is
> already fully installed. Unirac has endcaps for the SunFrame, but those
> aren't compatible with SolarMount. Anyone run into this before? Thoughts on
> solutions?
>
> Thanks,
>
> Dana
>
> Dana Brandt
> Ecotech Energy Systems, LLC
> www.ecotechenergy.com
> dana at ecotechenergy.com
> 360.318.7646****
>  ------------------------------
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org****
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Chris Mason
President, Comet Systems Ltd
www.cometenergysystems.com
Cell: 264.235.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120813/ccc8f1a2/attachment-0004.html>