[RE-wrenches] Solar Water Heating, Sensor line to electric water heater

[Dana]

If this is a thermister it is a milivolt circuit. Thermostat control wire at
24 VAC does not require this normally. How about a compression cord grip
type of TA?

 

Thanks

Dana Orzel -  Great Solar Works, Inc -  E - dana at solarwork.com -  V
970.626.5253

F - 970.626.4140     C - 970.209.4076     web - www.solarwork.com  

"Responsible Technologies for Responsible People since 1988"

P Please consider the environment before printing this email

 

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jason
Szumlanski
Sent: Monday, March 26, 2012 1:19 PM
To: RE-wrenches
Subject: [RE-wrenches] Solar Water Heating, Sensor line to electric water
heater

 

Normally we run the tank temperature sensor wire behind the cover plate on
the electric water heater (like it says to do in the control manufacturer's
instructions). The inspector wants it run through a hole in the tank wall or
cover plate with an "approved connector." Any ideas how to best accomplish
this?

 

http://www.fafcosolar.com/download/519/Tank-Wire.jpg

 

Jason Szumlanski

Fafco Solar

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120326/0cf7879f/attachment-0004.html>