[RE-wrenches] 24 vs. 48

[bob ellison]

The XL-1 problem is cured with the Classic.

Bob

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of R Ray
Walters
Sent: Tuesday, January 17, 2012 1:38 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] 24 vs. 48

The only advantages of 24 v are that you can create smaller KWH battery
banks, and that Bergey's XL.1 was only available in 24 v.
Anytime the design allows, I jump to 48 v.

R. Walters
ray at solarray.com
Solar Engineer




On Jan 17, 2012, at 11:11 AM, Nathan Jones wrote:

> 
> 
> Mark,
> It would seem to be a wash. As the voltage is halved the amperage is
doubled in the battery bank. This would seem to require doubling the
charging amperage so nothing is gained. On a system of any size the 48 volt
gets the default nod here. Charge controllers handle twice the solar.
Parallel battery strings are eliminated, or at least held to two. Wire
sizing might be reduced on the low voltage side of things. And much easier
future expansion possibilities, too.
> Cheers,
> Nathan Jones
> Power Source Solar Inc
> 
> 
> ------------------------------
> On Tue, Jan 17, 2012 10:56 AM CST Mark Frye wrote:
> 
>> Not really on topic to Jay's question, but...
>> 
>> Is 48v always better than 24v?
>> 
>> How important is bulk charging current to overall battery life?
>> 
>> In some cases, isn't it better to use a 24v inverter/charger which 
>> can develop a higher charge current for a battery bank that has a 
>> higher AH rating?
>> 
>> Mark Frye
>> Berkeley Solar Electric Systems
>> 303 Redbud Way
>> Nevada City,  CA 95959
>> (530) 401-8024
>> www.berkeleysolar.com
>> 
>> -----Original Message-----
>> From: re-wrenches-bounces at lists.re-wrenches.org
>> [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay 
>> peltz
>> Sent: Tuesday, January 17, 2012 8:43 AM
>> To: RE-wrenches
>> Subject: [RE-wrenches] battery buss bars
>> 
>> Hi All,
>> 
>> Where do I find buss bars for a battery parallel problem?
>> 
>> I've got to fix a brand new ( not me) system, that has 4 sets of 
>> L-16's at 24v.
>> Yea yea why didn't they go to 48?
>> 
>> So I want to use buss bars to parallel them, and looking for premade
ones.
>> 
>> Thanks in advance,
>> 
>> Jay
>> 
>> Peltz power
>> 
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
>> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> 

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org