[RE-wrenches] Utility disconnect

Marv Dargatz Marv.Dargatz at solaredge.com
Tue Oct 2 15:56:12 PDT 2012


I had a similar situation with my own PV system many years ago.  The utility person demanded a disconnect within 10 feet of the meter.  When I pulled out a copy of the rule 21 interconnect agreement (I'm in California), and pointed out that there was no such requirement, they got on the phone for about 30 minutes, then approved the installation.


See ya!

Marv
Director of Technology and Support, North America
SolarEdge Technologies, Inc.
Tech Support North America:  +877.360.5292
Mobile: +530.392.0356

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jesse Dahl
Sent: Tuesday, October 02, 2012 3:22 PM
To: Wrenches
Subject: [RE-wrenches] Utility disconnect

I just finished a job on a home where the utility didn't require the utility disco.  They contend that the service disconnect on the "farmer panel" meter base will work for them.  I said cool and didn't put one in. The inspector said he couldn't sticker the project because the utility disco was missing. I asked to see where that disconnect is required by code and he said he would get back to me and drove off.


Anyone come across this?

Jesse


Sent from my iPhone
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


CONFIDENTIALITY NOTICE: This e-mail and its attachments are intended only for the use of the individual or entity who is the intended recipient and may contain information that is privileged, confidential and exempt from disclosure or any type of use under applicable law. If the reader of this e-mail is not the intended recipient, or the employee, agent, or representative responsible for delivering the e-mail to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this e-mail is strictly prohibited. If you have received this e-mail in error, please reply immediately to the sender.
P Please think of the environment before printing this email



More information about the RE-wrenches mailing list