[RE-wrenches] Unirac SolarMount rail caps
holtek at sbcglobal.net
holtek at sbcglobal.net
Sat Aug 11 07:04:41 PDT 2012
just throwing this out....aluminum angle attached to ends - run between rail ends (each pair)? aluminum flat bar? closes ends and gives a trimmed look? Maybe use 24 or 22ga stainless than can be bent to form an angle? ask client to cover material cost as that is "custom" work beyond typical scope of build.
Holt E. Kelly
Holtek Fireplace & Solar Products
500 Jewell Dr.
Waco TX. 76712
254-751-9111
www.holteksolar.com
----- Original Message -----
From: Maverick Brown [Maverick Solar]
To: 'RE-wrenches'
Sent: Friday, August 10, 2012 6:56 PM
Subject: Re: [RE-wrenches] Unirac SolarMount rail caps
For the Bee's sake, just pump some grey silicone caulk into the ends and scrape flat. ??
From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Dana Brandt
Sent: Friday, August 10, 2012 3:12 PM
To: RE-wrenches
Subject: [RE-wrenches] Unirac SolarMount rail caps
We just finished installing a system on SolarMount and the client is unhappy with how the ends of the SolarMount rail look. She says it looks unfinished and is concerned about bees nesting in them. I know there are other rail products with more finished looking ends but this system is already fully installed. Unirac has endcaps for the SunFrame, but those aren't compatible with SolarMount. Anyone run into this before? Thoughts on solutions?
Thanks,
Dana
Dana Brandt
Ecotech Energy Systems, LLC
www.ecotechenergy.com
dana at ecotechenergy.com
360.318.7646
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120811/a08f4560/attachment-0003.html>
More information about the RE-wrenches
mailing list