[RE-wrenches] adjustable cordless impact drivers
Mark Westbrock
westbrock at positiveenergysolar.com
Wed Aug 8 06:27:57 PDT 2012
Hi Jay,
We use a Makita BFL300F "nut runner". They are expensive and hard to find,
but a great tool for torquing down top clamps. It is nice and long for
reaching over modules. We got ours from EF Bailey.
Cheers,
Mark
----
Mark Westbrock
Las Cruces Branch Manager
NABCEP Certified Solar PV Installer
NM ER-1J Journeyman Electrician
Positive Energy, Inc.
Las Cruces, NM
office: 575-524-2030
cell: 575-640-2432
westbrock at positiveenergysolar.com
www.positiveenergysolar.com
On Sat, Aug 4, 2012 at 1:56 PM, jay peltz <jay at asis.com> wrote:
> Hi All,
>
> Has anyone found a adjustable impact or drill that can be torque set?
>
> IE for installing racking/ modules?
>
> thanks,
>
> jay
>
> peltz power
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120808/551ef3b0/attachment-0003.html>
More information about the RE-wrenches
mailing list