[RE-wrenches] Magnum Energy Remote Control

[Dan Fink]

Hi Jay;

When customers don't buy the Magnum remote meter, I program and test their
inverter with mine, then bring it home. Then they can pay me to come back
if changes in programming are needed (rare) or (more common) new equipment
is added.....new generator, battery monitor, etc.

I always recommend the Magnum ME-BMK battery monitor for new Magnum
installations; In others where the owner doesn't want to buy the remote,
battery monitoring is through a previously-installed Tri-metric (about the
same price as the ME-BMK). The only cases where I run into no battery
monitor at all are systems that I didn't install, and am called in to
diagnose ;-)


Dan Fink,
Executive Director;
Otherpower
Buckville Energy Consulting
Buckville Publications LLC
NABCEP / IREC accredited Continuing Education Providers
970.672.4342 (voicemail)


On Sat, Jul 7, 2012 at 11:32 AM, jay peltz <jay at asis.com> wrote:

> Hi Dan,
>
> I've got to ask, if some customers don't buy those two things, I presume
> they
> have to pay you for the service call to make any adjustments?
>
> And, how do you tell them to operate the battery bank without a amp hr
> meter?
> I'm always curious about how others do this.
>
> thanks,
>
> jay
>
> peltz power
>
> --
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120707/79c39882/attachment-0003.html>