[RE-wrenches] Solar World 2.0 frames

[toddcory at finestplanet.com]

i did a top of pole mount with these modules. the traditional pole mount hardware was replaced with dpw power rails. i know this is a solid mount but somehow nuts and bolts through a rear flange feels stronger.
 
the biggest issue was there is no place to mount the wire routing clips. this proved somewhat problematic. i would not use these modules again because of that.
 
todd
 
 
 
On Friday, May 4, 2012 6:01pm, "Dave Palumbo" <dave at independentpowerllc.com> said:




All,
 
 
 
We are considering using Solar World 2.0 framed modules. Not having put hands on these yet, we are looking for testimonials and opinions on these “top mount only” modules.
And while we’re at, it what about Solar World’s 2.5’s with the bottom mount flange?
 
 
 
David Palumbo
Independent Power LLC
462 Solar Way Drive
Hyde Park, VT 05655 
www.independentpowerllc.com 
NABCEP Certified PV Installer
Vermont Solar Partner
24 Years Experience, (802) 888-7194
 
 
 


Sent from Finest Planet WebMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120504/36fabf09/attachment-0003.html>