[RE-wrenches] Multiple angle conundrum

Kirpal Khalsa solarworks at gmail.com
Wed Apr 4 09:38:07 PDT 2012


Hilton....there are a couple ways to approach this.....There are some
string inverters with multiple MPPT inputs....each different slope of roof
would be installed into its own input.....the other way is to use micro
inverters or other individual module optimizers....in which case you are
completely free from mismatched orientation and slope constraints.....
If you are looking to use a single MPPT channel string inverter you may
consider splitting the arrays and having two single string inverters one
for each tilt angle....That said the tilt angle difference feeding the same
inverter does not have as big of a negative impact as if the sub arrays are
facing different directions....
good luck,
Kirpal Khalsa

On Wed, Apr 4, 2012 at 9:14 AM, Hilton Dier III <hiltondier at gmail.com>wrote:

>  Wrenches,
>
> I am talking with a potential client about a roof mounted PV array. The
> client has a reasonably large south facing roof, but it is broken up by a
> large (18' W x 16' H) shed dormer. The roof is 10:12 and the dormer is 6:12.
> I designed a layout that gave the dormer some room to avoid shading. The
> client was disappointed by how much wattage I could get on his roof. I
> pointed out that installing modules in the shade of the dormer was a bad
> idea.
>
> He is also talking to another installer. The other installer proposed
> installing part of the array on the 10:12 roof and part on the 6:12 dormer.
> The client had already asked me about that and I gave him a rudimentary
> explanation of maximum power point tracking and the inefficiency of such an
> arrangement. He asked them about that and their guy said "No big deal." He
> is still considering the two-angle scenario.
>
> So, how much efficiency will he lose by going with two angles? It seems
> like the ultimate MPPT design error to me, but I don't have a number for
> him to make my case. I suppose it all comes down to cents per delivered kWh
> in the end, but two different roof angles seems the the wrong way to go.
> I'd like to be able to give him a definitive idea of what he would be
> sacrificing with that scenario.
>
> Side note: The other installer is using the new Sunpower E20 modules. They
> seem to be available only from the manufacturer. Anybody have a source? Has
> anybody used them yet? Do they live up to the hype?
>
> Many thanks,
>
> Hilton
>
> --
> Hilton Dier III
> Renewable Energy Design
> Partner, Solar Gain LLC
> 453 East Hill Rd.
> Middlesex, VT 05602
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120404/cf7613ee/attachment-0003.html>


More information about the RE-wrenches mailing list