[RE-wrenches] Installations in High Salt Spray Environments

[Jay Peltz]

Sent from my iPhone

On Mar 14, 2012, at 12:33 PM, Bill Hoffer <sunengser at gmail.com> wrote:

> Esteemed Wrenches
> 
> I have a large 100 kw project coming up in the South Pacific on an Island and wanted to see what others have been doing in these locations.
> 
> Checking the archives it has been awhile since this topic has been discussed.  I would like an update for best practices and lessons learned when installing solar in a very high Salt Spray Environments.  With some modules getting the new IEC 61701 Salt Spray certification  ( Schott , Canadian Solar , Evergreen Sanyou HIT, Serephim Solar, Upsolar ) it seems the industry is starting to pay attention to these locations rather than writing warranties that give them an out.  
> 
> Any info on what products have done well ( or not) and best practices to minimize corrosion issues would be very welcome.
> 
> Thanks
> 
> Bill
> 
> -- 
> Bill Hoffer PE
> NABCEP Certified Solar PV Installer™
> Sunergy Engineering Services PLLC
> 2504 Columbia Ave NW
> East Wenatchee WA 98802-3941
> SunEngSer at gmail.com Cell:(509)679-6165
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20120314/794e4340/attachment-0003.html>