[RE-wrenches] small battery boxes

[bob ellison]

Have you tried "Quick Cable" I think you will need to vent and lock it 

Bob Ellison

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jeff Yago
Sent: Thursday, December 29, 2011 11:53 PM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] small battery boxes

We are having a real problem finding a pole-mounted battery box for smaller
solar sign lighting projects.  We have switched to LED lights which cost
more byt do not require the larger batteries and solar module.  However, the
smallest battery box we can find is the DPW 16" wide x 9" deep X 20" tall.
This is a great box for  group 31 battery, but is too large and costs too
much for smaller applications.  I am thinking about using a group 22 battery
which would fit in a pole-mounted battery box that is 12" wide x 8" deep x
15" high, which still leaves room for a control panel at the top rear.

It does not look like the solar manufacturers have anything, so do you know
of anybody making a battery box this size but perhaps it is being sold for
another type application.  It still will need small screened louvers for
ventilation and a locking door, but we can always make our own control panel
if that is not supplied.  Since its 12 volt DC and off-grid application I do
not think it needs to be UL listed which might help reduce cost, but not
sure.

Any suggestions??

Thanks,

Jeff Yago
  



_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org