[RE-wrenches] SMA Sunny Design temperature/voltage calculations

[Jonathan Hill]

Will it be Mac compatible like the old online tool?

Jonathan Hill
Solar applications engineer
Sierra Solar Systems
888-ON-SOLAR


On Dec 2, 2011, at 11:33 AM, Steve Jefferson <Steve.Jefferson at sma-america.com> wrote:

> Morning Wrenches,
> 
> The online version of the String sizing program was flawed in many ways. I also believe that installers were relying on it exclusively to design systems.
> Part of the issue is that it was using data for the design from our main headquarters in Kassel, Germany. 
> 
> Sunny Design is a much more powerful tool and much more accurate.
> I understand people don't like change, but Sunny Design is a huge improvement vs. the online String sizing program.
> 
> SMA will be releasing a new version online, but it will be similar to Sunny Design.
> Should be available sometime in the first quarter 2012.
> 
> SMA America, LLC
> Steve Jefferson
> Sr. Technical Service Specialist, Sunny Family
> 6020 West Oaks Blvd, Suite 300
> Rocklin, CA 95765 - 3714
> U.S.A.
> Tel:  +1 916 625 0870
> Fax: +1 916 624-2445
> Service Line +1 877 697 6283 (Toll Free)
> Email: steve.jefferson at sma-america.com
> www.SMA-America.com
>  
> This email and any attachments thereto may contain SMA America, LLC confidential, privileged and private material for the sole use of the intended recipient. Any review, copying, or distribution of this email (or any attachments thereto) by others is strictly prohibited. If you are not the intended recipient, please contact the sender immediately and permanently delete the original and any copies of this email and any attachments thereto. Thank you.
> 
> -----Original Message-----
> From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Joel Davidson
> Sent: Friday, December 02, 2011 7:46 AM
> To: Howie at CatamountSolar.com; RE-wrenches
> Subject: Re: [RE-wrenches] SMA Sunny Design temperature/voltage calculations
> 
> Howie,
> 
> Thank you for speaking up.
> 
> SMA, please bring back the old string sizing program. Please.
> 
> When John Berdner introduced the SunnyBoy and showed us the spreadsheet (I 
> got version X3.13 in 2003), it answered all our temperature, voltage and 
> power questions. When the string sizing program went on-line, it literally 
> changed system design. You could quickly do what-ifs and try different 
> inverter, module and strings to meet site and requirements.
> 
> Wrenches speak up. Hopefully SMA will do the right thing and put that 
> oldie-but-goodie back on-line.
> 
> Fröhliche Weihnachten
> Joel Davidson
> 
> 
> ----- Original Message ----- 
> From: "Howie Michaelson" <howie at suncatchervt.com>
> To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
> Sent: Thursday, December 01, 2011 9:17 PM
> Subject: [RE-wrenches] SMA Sunny Design temperature/voltage calculations
> 
> 
> Apropos to the great discussion about temperature voltage calculations,
> has anyone else been frustrated by the removal of output information on
> the Sunny Design tool compared to the old on-line string sizing
> calculator?  It was very useful to me to have the string sizer show the
> temperature voltage calculations for low and high temperature - as far as
> I know the only string sizing application that showed this info.
> 
> The defunct online sizer allowed me to quickly look at a variety stringing
> options, see the impact on voltage, narrow down the possibilities and then
> run my own voltage calculations to verify.  Sunny Design makes quickly
> scanning various string options not so easy, and it buries the results
> behind more obscure output info.  It is quite a sophisticated program, but
> I wish they gave a way to see the calculations behind the choices it
> makes.  Or am I just missing something?
> 
> Howie
> -- 
> Howie Michaelson
> NABCEP Certified Solar PV InstallerT
> 
> Catamount Solar, LLC
> Renewable Energy Systems Sales and Service
> VT Solar Electric & Hot Water Incentive Partner
> http://www.CatamountSolar.com
> 802-272-0004
> 
> 
> 
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
>