[RE-wrenches] Torque Wrenches
Glenn Burt
glenn.burt at glbcc.com
Fri Jul 8 08:24:19 PDT 2011
We recently bought a couple of fixed value torque drivers for a Sunpower
T-10 job. They were reasonably priced, set to a value we needed and end in a
¼ driver tip (can be adapted to any bit).
http://www.flexibleassembly.com/Products/CDI-Product-Index/1501TP-1
-Glenn Burt
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jason
Szumlanski
Sent: Friday, July 08, 2011 9:02 AM
To: RE-wrenches
Subject: [RE-wrenches] Torque Wrenches
Im looking for a recommendation on a good torque wrench for installing S-5
clamps. I saw the past posts on torque screwdrivers, but Im looking for a
wrench calibrated to the 100-150 in-lbs range.
Jason Szumlanski
Fafco Solar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110708/65fcdfd9/attachment-0004.html>
More information about the RE-wrenches
mailing list