[RE-wrenches] Enphase Nema 6 enclosure - not
Jason Szumlanski
Jason at fafcosolar.com
Thu Jun 16 18:53:54 PDT 2011
Well, at least their warranty is second to none... for now... but if I
had to bet on someone to stand behind their product, they would be high
on the list just for the sheer dollars that must be flowing into their
investment capital coffers.
I'd venture to say that there is not a single serious complaint out
there about warranty coverage. We've had a few issues, but every single
one has been resolved expeditiously by their surprisingly well trained
and empowered staff.
On that note, I've seen 3 GFI errors so far on Enphase micros, but never
found out why.
Jason Szumlanski
Fafco Solar
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Kirk
Herander, VSE
Sent: Thursday, June 16, 2011 9:50 PM
To: 'RE-wrenches'
Subject: [RE-wrenches] Enphase Nema 6 enclosure - not
I just figured out why I could not reset a GFI error on one of my
micro-inverters. First, I noticed condensation in the led lens, then
water literally dripped out of the AC side as soon as I disconnected it.
This was mounted on the top backside of a panel, roughly two ft above a
flat roof. ..... fascinating
Kirk Herander
Vermont Solar Engineering
802.863.1202 fax 802.863.7908
VT RE Incentive Program Partner
NYSERDA Incentive-eligible Partner
NABCEPTM Certified Installer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110616/d7375afe/attachment-0004.html>
More information about the RE-wrenches
mailing list