[RE-wrenches] Supporting conductors in Free Air

[Brian Mehalic]

Hey Andrew, article 338 (USE) references 334.30 regarding securing and supporting. Not sure if there is another reference. 
Brian 

Sent from my iPhone. 

On Jun 5, 2011, at 6:47 PM, Andrew Truitt <atruitt at gmail.com> wrote:

>  
> Gents - Where in the code does it specify that conductors in free air (like module wiring) should be supported within 12" of all terminations?
> 
> For a brighter energy future,
> 
> 
> Andrew Truitt  MSc., LEED GA 
> NABCEP Certified PV Installer™ (ID# 032407-66)
> Principal
> Truitt Renewable Energy Consulting
> (202) 486-7507
> http://www.linkedin.com/pub/andrew-truitt/8/622/713
> 
> 
> <24 copy.jpg>
> 
> <NABCEP logo.jpg><LEED_GAcmyk.gif>
> 
> 
> "Don't get me wrong: I love nuclear energy! It's just that I prefer fusion to fission. And it just so happens that there's an enormous fusion reactor safely banked a few million miles from us. It delivers more than we could ever use in just about 8 minutes. And it's wireless!"
> 
> ~William McDonough
> 
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110605/d748f343/attachment-0004.html>