[RE-wrenches] Metal roof w/o standing seams.
Jason Lerner
wapalco at rockisland.com
Mon May 9 07:01:41 PDT 2011
Hi Jesse,
I never did scab, having similar concerns of not doing it right, and use blocking.....
Best,
Jason
On May 7, 2011, at 6:46 PM, Jesse Dahl wrote:
> Jason,
>
> If you scab onto a truss, is there a certain length the scab board should be? I have never heard of this practice. I worked on a lot of roofs back in my carpenter days!
>
>
> Thanks for the advice!
>
>
>
> Jesse
>
> Sent from my iPhone
>
> On May 5, 2011, at 9:23 AM, Jason Lerner <wapalco at rockisland.com> wrote:
>
>> Hello Jesse,
>>
>> There is one truss manufacturer we work with who will not let us lag into the truss, and they require blocking or scabbing on another rafter to attach to.....
>>
>> Best,
>>
>> Jason Lerner
>>
>> Waldron Power and Light Co.
>>
>> On May 4, 2011, at 5:50 PM, Jesse Dahl wrote:
>>
>>> Wrenches,
>>>
>>> I will be installing system on a metal roof this summer and I am looking for some advice. The roof is metal with 2x4 wood trusses. There is no standing seam to attach to, so I am looking at a Ejot type attachment system. The modules are Silicon-energy cascade series.
>>>
>>> Any tips or advice on mounting to this roof type or mounting this type module would be greatly appreciated.
>>>
>>>
>>> Jesse Dahl
>>>
>>> Sent from my iPad!!!
>>> _______________________________________________
>>> List sponsored by Home Power magazine
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Options & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>>
>>> Check out participant bios:
>>> www.members.re-wrenches.org
>>>
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list