[RE-wrenches] Tall L-feet

[William Miller]

Jim:

Direct power makes a "bent" tall foot.  This item is made from flat 
aluminum stock that has been bent.  I have avoided them because an extruded 
foot seems stronger than one made from bent metal.  This item may work for 
you, however.

See page 8 of this 
catalog:  http://www.dpwsolar.com/pdf/lit/SL-ML-1034-2P_DPWPwerRailCat.pdf

William Miller


At 11:24 AM 4/14/2011, you wrote:
>
>  Wrenches
>after a brief search of roof-mount www sites I was not able to find a 
>taller aluminum L-foot than the standard 3 inch tall style. I recall that 
>Unirac makes a double wide one but about 2 inches taller would do the trick.
>Thanks as always
>Jim Duncan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110414/60aa9e37/attachment-0004.html>