[RE-wrenches] Morningstar relay driver configuration help

[Mick Abraham]

Sorry, bad terminology on my part.

I was wishing for software that could do more than "set the relay driver" to
respond to programmed parameters.

If a training application could instruct the human on a wide range of "end
results", relay driver action that would be appropriate for each one, and
the action of external components which would help meet those results,
etc...that's more of what I was wishing for.

Jolliness,

Mick Abraham, Proprietor
www.abrahamsolar.com

Voice: 970-731-4675


On Thu, Apr 14, 2011 at 1:53 AM, Hugh <hugh at scoraigwind.co.uk> wrote:

> At 10:30 -0600 13/4/11, Mick Abraham wrote:
>
>> I wish that M-star had some "wizard type" Windows software that could lead
>> one through the setup.
>>
>
> The wizard is the only way I know of for setting it up.  I use 'MS view'
> and choose the relay driver wizard.  I see they have a new edition out last
> month so I will download and try that.
> http://www.morningstarcorp.com/en/support/item.cfm?ItemId=400
> Seems pretty self-explanatory to me but the manual is there for reference
> too.
>
> I did not know that there was any other way to set them up.
> --
> Hugh Piggott
>
> Scoraig
> http://www.scoraigwind.co.uk
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110414/dc4c61a5/attachment-0004.html>