[RE-wrenches] galvanized barn roofing

Mark Dickson Mark at OasisMontana.com
Fri Apr 8 09:26:48 PDT 2011


This stuff is great! http://www.eternabond.com/DoubleStick-p/cr-ds.htm .
Hint: stick it in the freezer and then trim it to size with shears. Also,
make sure you got it in the right place before you stick it down!

 

Best regards,

 

Mark Dickson,

NABCEP Certified Solar PV Installer T

Oasis Montana Inc.

 

  _____  

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Kent
Osterberg
Sent: Thursday, April 07, 2011 9:17 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] galvanized barn roofing

 

Daryl,

AEE has a corrugated
<http://www.alt-energy.com/PDFs/SnapNrack-Tech-Bulletin-CRB_7-23-09.pdf>
roof block that works pretty well. Penetrations are through the ridges,
where leaks are less likely, and they can be sealed with Butyl tape. One
draw back, same with the EJOT, is that the metal ridges will rarely line up
with support structure below. You'll need to install extra bracing
underneath for almost every bracket. If working over an insulated attic, you
won't be able to install very far down from the ridge.

Kent Osterberg
Blue Mountain Solar


penobscotsolar at midmaine.com wrote: 

Does anyone have experience mounting arrays on barns with 24" wide
galvanized roofing (not standing seam)? It is flat, not corrugated, but
has an overlapping edge on either side. It's pretty much a standard on
barn roofs around here, but I hesitate to penetrate any metal roof. How
have others dealt with this type of material?
 
Thanks for any information,
Daryl
 
Daryl DeJoy
NABCEP Certified PV installer
Penobscot Solar Design
 
 
_______________________________________________
List sponsored by Home Power magazine
 
List Address: RE-wrenches at lists.re-wrenches.org
 
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
 
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
 
Check out participant bios:
www.members.re-wrenches.org
 
 
 
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110408/e887ce52/attachment-0004.html>


More information about the RE-wrenches mailing list