[RE-wrenches] Seam clamps with or w/o rails
ntrei at 1scom.net
ntrei at 1scom.net
Fri Feb 18 09:24:38 PST 2011
One downside of standing seams is that they are rarely square with the plane of the roof.
The higher the array the greater the slope on the module mounting surface.
Plan on a little elbow grease to straighten the ribs once S5.
& rails are in place.
Jim Duncan
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: August Goers <august at luminalt.com>
Sender: re-wrenches-bounces at lists.re-wrenches.org
Date: Fri, 18 Feb 2011 07:05:29
To: RE-wrenches<re-wrenches at lists.re-wrenches.org>
Reply-To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Seam clamps with or w/o rails
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
More information about the RE-wrenches
mailing list