[RE-wrenches] Barrel Roof Mounting

[William Miller]

Aaron:

I might be able to offer some insight I have developed with some previous 
design evolutions, but you forgot to include an essential piece of 
information:  Curvature over N-S or E-W?

William

PS:  Also, Off-grid or Grid-tie?

wm



At 11:18 AM 1/22/2011, you wrote:
>It depends upon the curature of the roof.  If the cure is great enough run 
>rails horizonal and mount portrate, if the curature is less and your 
>modules can mount on the short side, same plan mounting landscape.  .
>
>
>From: Aaron Mandelkorn <reosolar at gmail.com>
>To: re-wrenches at lists.re-wrenches.org
>Sent: Sat, January 22, 2011 10:40:46 AM
>Subject: [RE-wrenches] Barrel Roof Mounting
>
>Just wondering if anyone has any info about mounting systems designed for 
>barrel roofs.  I have been looking into this for a little while and can't 
>seem to find any commercially available mounting solution to this roof 
>type.  Has anyone else had any experience mounting to this roof type?  My 
>first thought was to create some kind of raised flat structure to mount to 
>using unistrut and standoffs and maybe a top down mounting system on top 
>of it?  Any ideas?
>
>Aaron Mandelkorn
>Renewable Energy Outfitters
>P.O. Box 65
>Salida CO 81201
>(970)596-3744
><mailto:reosolar at gmail.com>reosolar at gmail.com
>www.reosolar.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110122/3b20b636/attachment-0004.html>