[RE-wrenches] GT inverter
jay peltz
jay at asis.com
Mon Nov 21 08:07:06 PST 2011
Hi Brian,
I just found on Midnite's site a brand new set of combiners that do the job, very cool, can be configured in multiple ways!
For the size I was looking at it would need 3 strings, ( 5+ amps per string, 15 series fused rating)
So as I understand it, I've got to install fusing, which means that I'd need 2 of those expensive discos.
So usual that the manufactures are not providing the equipment to do the install.
I have to say, given the confusion for this hook up, I might opt for the tried and true sma.
Thanks all for your imput.
Jay
Peltz power
Sent from my iPad
On Nov 21, 2011, at 7:10 AM, Brian Mehalic <brian at solarenergy.org> wrote:
> Hey Jay-
> Schneider/Square D does make a fusible, 4-pole, 30 A, 600 Vdc disco, allowing you to fuse and double-break both the positive and negative, but I have a feeling it is quite pricey. Should be model number H461x, depending on the NEMA category you require.
> Brian
>
>
> On Sun, Nov 20, 2011 at 5:36 PM, jay peltz <jay at asis.com> wrote:
> HI mac,
>
> I like this choice also.
>
> But what is on the market for a TL fused disco?
>
> jay
> On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:
>
>> I would see if the Aurora 6000 would be a good fit. I believe it will string but it may clip depending on tilt, orientation and anticipated temps.
>>
>>
>> Mac
>>
>> On Sun, Nov 20, 2011 at 2:44 PM, jay peltz <jay at asis.com> wrote:
>> Hi All,
>>
>> Anybody have a favorite string GT inverter for the following.
>>
>> 6700 watts
>> 30 x sanyo 225 watt
>>
>> no shading
>> 240v output
>>
>> thanks,
>>
>> jay
>>
>> peltz power
>>
>>
>>
>>
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
>>
>> --
>>
>>
>>
>> Mac Lewis
>>
>> "Yo solo sé que no sé nada." -Sócrates
>>
>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
>
>
> --
> ========================
> Brian Mehalic
> NABCEP Certified Solar PV Installer™ R031508-59
> IREC ISPQ Certified Affiliated Instructor/PV US-0132
> PV Curriculum Developer and Instructor
> Solar Energy International
> Carbondale, CO 81623
> http://www.solarenergy.org
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20111121/28fb8a12/attachment-0003.html>
More information about the RE-wrenches
mailing list