[RE-wrenches] Push-in Wire Connectors

[William Miller]

Daryl:

You got a part number on those connectors (and a link to a web page)?

William



At 11:56 AM 10/20/2011, you wrote:
>We use Burndy insulated blocks for transitioning with Enphase. Inside the
>connector they use the same blue silicone that is used in the wet rated
>twist on's only with a pretty reliable long term connection.They tighten
>with a hex wrench. They aren't cheap, but security rarely is. They are
>also not that bad. I think we pay about $5 each for one's that are rated
>for#14-#8. We easily fit four of these in a 4x4x2 box. If you are doing
>separate strings they also have three way connectors, slightly larger, but
>still fairly compact.
>
>Daryl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20111020/bf503a7a/attachment-0003.html>