[RE-wrenches] battery cycle life, US Battery

[Ron Young]

Hey Ray I like your dolly! I could use something like that to move the big Surrette/Rolls batteries. Not nearly as big as a HUP but at 300+ lbs can be a little hefty.

Ron

On 2011-09-17, at 6:52 PM, Ray Walters wrote:

> Todd;
> 
> I haven't tried the 2v L16s, because they were rated the same cycle life. (I could be wrong?)
> Are you really moving L16s by yourself? I've done it, but its soo bad for your back.  I made several tools for moving the HUPs, one is a frame and block and tackle for pulling the separate cells out (weigh less than an L16) and I made a 4 wheeled dolly that can roll a HUP right off a trailer, through a 30" door, and into the room.
> I don't know of anyone that could move a HUP themselves (the smallest are 742 lb). My favorite is to use a bobcat or forklift, and just set them in place. Here's a pic of our carrier, hopefully its small enough to post:
> 
> Ray
> 
> 
> 
> On 9/17/2011 11:36 AM, toddcory at finestplanet.com wrote:
>> 
>> What about the 2 volt L-16 versions? Has anyone had success with them for larger banks? I work alone and HUPs are too heavy to lift on my own... however 24, L-16's in one series string would be a hell of a battery bank too.
>>  
>> Todd
>>  
> <HUP-Trailer.jpg>_______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110917/cfb9c084/attachment-0003.html>