[RE-wrenches] Sharp modules

Drake drake.chamberlin at redwoodalliance.org
Sun Sep 11 16:09:37 PDT 2011


What do you think of the quality of the new Sharp modules?  The 240 
F2 has a good PTC rating, but a power tolerance range of 15% (+10% 
-5%).  With the frame and construction issues, I wonder if the 
quality of Sharp modules is slipping.

Has Sharp cut quality to keep competitive?

Drake




  09:34 PM 9/9/2011, you wrote:
>Happy Friday.....so i was installing some sharp 240w modules today 
>and noticed again that the modules do not have any sealant between 
>the glass and the aluminum frame.....I have noticed this on the 
>216's and the 80's as well.....the glass and cells all seem to float 
>independent of the frame......all other modules we have used have a 
>sealant sometimes too much in the groove surrounding the glass 
>inside of the frame.....
>As we were installing the modules we noticed significant 1/4"+ of 
>variance in frame dimensions from one end of module to other, with 
>mid clamps holding the modules on one side you could pull the frame 
>and it would move independently of the glass......
>Does this manufacturing method have some advantages that i am not aware of?
>It just seemed odd that the glass and silicone cells and backing 
>encapsulant can all move around without being held firmly in 
>place......we are new to using the sharp modules and was interested 
>to see if anyone else had any insight into this design....
>Cheers.
>
>--
>Sunny Regards,
>Kirpal Khalsa
>NABCEP Certified Solar PV Installer
>Renewable Energy Systems
><http://www.oregonsolarworks.com>www.oregonsolarworks.com
>541-218-0201 m
>541-592-3958 o
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: 
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org

Drake Chamberlin
ATHENS ELECTRIC
OH License 44810
CO license 3773
NABCEP Certified PV
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110911/9b731b89/attachment-0003.html>


More information about the RE-wrenches mailing list