[RE-wrenches] SPAM-LOW: Re: Interfacing an Air 403 wind generator

[Chris Daum]

I'm with Bob-o on this one.  I suspect if they had any indicator of the
power it actually produced, they would be less in love with it.
 
Chris Daum
Oasis Montana Inc.

  _____  

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Bob-O
Schultze
Sent: Thursday, May 05, 2011 3:13 PM
To: RE-wrenches
Subject: SPAM-LOW: Re: [RE-wrenches] Interfacing an Air 403 wind generator


Give it a resistor to work against and call it Kinetic Yard Art. Not worth
much else... 

On May 5, 2011, at 11:15 AM, Peter Talmage wrote:

Hi Dana,

The battery and all associated equipment is being totally removed as the
folks are now unable to do the required maintenance. They really love the
little Air 403 and would like to interface it if at all possible even if it
doesn't make economical sense.

Peter

--- On Thu, 5/5/11, Dana <dana at solarwork.com> wrote:




From: Dana <dana at solarwork.com>
Subject: [RE-wrenches] Interfacing an Air 403 wind generator
To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
Date: Thursday, May 5, 2011, 1:32 PM



The Air is DC, wouldn't it just feed the battery bank and  there for less
from the PV to the battery bank and therefore more PV to go to the grid
tie...


 

It is a mighty small unit to go to the effort to grid tie unless he has a
18MPH+ yearly wind speed. If he has that much wind go for a SWWP - Skystream
wind turbine that is UL listed for grid tie.


 

Dana Orzel

Great Solar Works, Inc

E - dana at solarwork.com

V - 970.626.5253

F - 970.626.4140

C - 970.209.4076

web - www.solarwork.com


 

"Responsible Technologies for Responsible People since 1988"

Do not ever believe anything, but seriously trust through action.


 

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Peter
Talmage
Sent: Thursday, May 05, 2011 11:26 AM
To: RE-wrenches
Subject: [RE-wrenches] Interfacing an Air 403 wind generator


 

I have a client with an independent power system who is going utility
interfaced. We are putting the 24 volt arrays on Ephase inverters. He wants
the Air 403 to be interfaced as well. Has anyone done this and if so, how ?
Thanks

Peter Talmage, P.E.

Energy and Design


 

-----Inline Attachment Follows-----


_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org
<x-msg://202/mc/compose?to=RE-wrenches@lists.re-wrenches.org> 

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org



_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110505/8b54850b/attachment-0003.html>