[RE-wrenches] PV powered music festival
boB Gudgel
boB at midnitesolar.com
Wed Apr 27 16:15:40 PDT 2011
On 4/27/2011 3:51 PM, benn kilburn wrote:
> Wrenches,
> I have been asked about sizing PV systems for a couple different music
> festivals that have been run solely off of generators in the past.
> The problem i'm having is determining the energy consumption of
> music/stage (amps, speakers, lights, etc...?) loads as well as
> concession. The organizers have never considered the kwh of
> electricity used and it has never been metered. I believe the
> attendance of one festival is expected to be in the range of 5000 and
> the other closer to 15000 over the course of a weekend.
>
> Do any of you have any experiences in this area? How were the loads
> determined?
>
> No doubt that generator back-up will still be needed, to what extent,
> will be determined. So what we're looking at would be a temporary
> off-grid PV system with generator back-up...
>
> Any suggestions on how to proceed with this one?
>
> benn
You might want to check the guys out from this article from a year or
two ago.
I think it's just the kind of thing you're looking for.
http://www.prosoundweb.com/photos/category/C17/
Four (4) pacific northwest companies made some of the products for this
tour including the mixer board.
boB
>
> DayStar Renewable Energy Inc.
> benn at daystarsolar.ca
> 780-906-7807
> HAVE A SUNNY DAY
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options& settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules& etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110427/97c97407/attachment-0003.html>
More information about the RE-wrenches
mailing list