[RE-wrenches] galvanized barn roofing

Andrew Truitt atruitt at gmail.com
Thu Apr 7 18:11:57 PDT 2011


Here's the VersaBracket option from S-5!:

http://www.s-5.com/clamps/index_71.cfm


For a brighter energy future,

Andrew Truitt
Principal
Truitt Renewable Energy Consulting
NABCEP Certified PV Installer™ (ID# 032407-66)
(202) 486-7507
http://www.linkedin.com/pub/andrew-truitt/8/622/713

[image: 24 copy.jpg]

"Don't get me wrong: I love nuclear energy! It's just that I prefer fusion
to fission. And it just so happens that there's an enormous fusion reactor
safely banked a few million miles from us. It delivers more than we could
ever use in just about 8 minutes. And it's wireless!"

~William McDonough





On Thu, Apr 7, 2011 at 5:53 PM, jay peltz <jay at asis.com> wrote:

> Hi Daryl,
>
> I have drilled a small pilot hole, put plenty of sealant around it, then
> lag through it with what ever foot you are using.
>
> I don't think the cost of flashing around each foot with a rubber boot and
> 15 screws is any better but its sure more costly in time and money.
>
> jay peltz power
>
>
> On Apr 7, 2011, at 2:28 PM, penobscotsolar at midmaine.com wrote:
>
> > Does anyone have experience mounting arrays on barns with 24" wide
> > galvanized roofing (not standing seam)? It is flat, not corrugated, but
> > has an overlapping edge on either side. It's pretty much a standard on
> > barn roofs around here, but I hesitate to penetrate any metal roof. How
> > have others dealt with this type of material?
> >
> > Thanks for any information,
> > Daryl
> >
> > Daryl DeJoy
> > NABCEP Certified PV installer
> > Penobscot Solar Design
> >
> > mbers.re-wrenches.org
>  >
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110407/86571737/attachment-0003.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 24 copy.jpg
Type: image/jpeg
Size: 35142 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110407/86571737/attachment-0003.jpg>


More information about the RE-wrenches mailing list