[RE-wrenches] NABCEP Test

[Nick Soleil]

Hi wrenches:
    I sat for the NABCEP exam last weekend, and was surprised yesterday to hear 
that we will not receive the exam results for another month!  I had heard that 
it only took a week.  What was your experience.  Also, the e-mail yesterday said 
that the Board has to decide what grade will be a passing grade?  Can that be 
true?  Does the grade get set to control the number who pass or fail?  That 
doesn't seem right.

 Nick Soleil
Project Manager
Advanced Alternative Energy Solutions, LLC
PO Box 657
Petaluma, CA 94953
Cell:   707-321-2937
Office: 707-789-9537
Fax:    707-769-9037




________________________________
From: Hans Frederickson <hans at fredelectric.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Thu, March 31, 2011 8:15:19 AM
Subject: Re: [RE-wrenches] Expansion joints

  
We used an OZ-Gedney expansion coupling for  1-1/4" EMT on a recent job. The 
part # is TX-125 for 1-1/4", and it would be  TX-150 for 1-1/2". It is the same 
as the OZ-Gedney AX expansion coupling for  rigid conduit, but uses a rigid 
nipple and EMT connectors to adapt to  EMT. The assembly is UL listed.
 
-Hans
 


________________________________
 From: re-wrenches-bounces at lists.re-wrenches.org  
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Erika  Weliczko
Sent: Wednesday, March 30, 2011 5:54 PM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] Expansion  joints


I  recently used a Hubbell Killark product for rigid/IMC and was not happy with 
how the threads of the coupling engaged in factory conduit  threads.
 
Crousehinds  XJG-EMT series is intended for EMT. And is described as being used 
indoors or  outdoors. The EMT couplings mostly seem to be compression.
 
 
REpower  SOLUTIONS
www.repowersolutions.com
P:  216.268.2275
C:  216.402.4458
 
From:re-wrenches-bounces at lists.re-wrenches.org  
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jamie  Johnson
Sent: Tuesday, March 29, 2011 2:33 PM
To: RE-wrenches
Subject: [SPAM] Re: [RE-wrenches] Expansion  joints
 
Peter,
 
Cooper  makes one for 1.5" emt, not sure if it is rated for wet locations or  
not.
 
part  #XJG54 EMT, it allows for up to 4" max of conduit  movement.
 
Jamie  Johnson
NABCEP  Certified PV Technical Sales Professional
NABCEP  Certified Solar PV Installer
 
General  Manager
SOLAR  POWER ELECTRIC


 
 
 
--------    Original Message --------
>Subject: [RE-wrenches] Expansion joints
>From:    "Peter Parrish" <peter.parrish at calsolareng.com>;
>Date:    Tue, March 29, 2011 1:04 pm
>To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
>
>Does    anyone have information (manu and part number) for expansion joints    
>for
>1-1/2 EMT? I have also heard that many EJs are designed for rigid    conduit
>(RMC) and may not be directly applicable to EMT.
>
>-    Peter
>
>Peter T. Parrish, Ph.D., President
>California Solar    Engineering, Inc.
>820 Cynthia Ave., Los Angeles, CA 90065
>CA Lic.    854779, NABCEP Cert. 031806-26
>peter.parrish at calsolareng.com 
>Ph 323-258-8883, Mobile 323-839-6108, Fax    323-258-8885
>
>_______________________________________________
>List    sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options    & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: 
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List    rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check    out participant bios:
>www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110331/bcc9aa54/attachment-0003.html>