[RE-wrenches] Fluke meter recall

[benn kilburn]

wow, that was from back in May of 2009.  I bought mine about 6-8 months ago, a 337, that is in fact affected by this recall.  You'd a thunk it would/should have been pulled off the shelf.can't say that i noticed any voltage discrepancies, but then again, its not like i always test a circuit with two meters.....
i do notice that the current reading won't always zero out.  just setting the dial to "A" (ac or dc) and it will fluctuate between 0.1A and 0.5A.  anyone else notice this?

Very much appreciate the heads up Glenn.
benn

DayStar Renewable Energy Inc. benn at daystarsolar.ca780-906-7807 HAVE A SUNNY DAY







From: glenn.burt at glbcc.com
To: re-wrenches at lists.re-wrenches.org
Date: Wed, 19 Jan 2011 11:57:44 -0500
Subject: [RE-wrenches] Fluke meter recall



FYI recall on a few popular Fluke clamp-on DMMs: http://www.fluke.com/Fluke/usen/support/safety/33X-Recall.htm -Glenn Burt
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20110119/6c7ac6db/attachment-0003.html>