[RE-wrenches] Ilsco lay-in lugs & starwashers

[Chris Anderson]

Was this ever addressed?

-Chris Anderson
  Chief Technology Officer
  Resources Group 
  C: 603-732-2411
  Borrego Solar Systems

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jerry Caldwell
Sent: Wednesday, November 17, 2010 5:54 PM
To: RE-wrenches
Cc: 'Christopher Flueckiger'; Tim Zgonena
Subject: Re: [RE-wrenches] Ilsco lay-in lugs & starwashers

Bill,

You stated below that a starwasher installed with an Ilsco lay-in lug violates the listing of the lug.  Can you point me to where this is in writing, or does one have to purchase the UL standard?

Best,
Jerry Caldwell

--- On Sun, 9/12/10, Bill Brooks <billbrooks7 at yahoo.com> wrote:


> Finally, many of the module manufacturer's installation
> manuals, the ones we
> are supposed to believe, actually violate the listings of
> the products they
> recommend. The ILSCO GBL-4DBT lay-in lug is the most famous
> example of these
> mistakes. Several prominent installation manuals state that
> a stainless
> starwasher must be installed under ILSCO lug. Although this
> will work, it is
> a violation of the listing of the lug. Yet it is in the
> installation manual
> and it is one of only a very few options--and it is wrong.
> What are we to
> think of this whole situation? It is out of control and
> messed up.


      
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org