[RE-wrenches] Padded equipment cases.

[Max Balchowsky]

I spent years in the movie industry - Anvil or Pelican is all we ever used, 
can't beat em.

 Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810




________________________________
From: "dan at foxfire-energy.com" <dan at foxfire-energy.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Fri, August 13, 2010 3:30:51 AM
Subject: Re: [RE-wrenches] Padded equipment cases.

I like pelican:

http://www.pelican-case.com/ 



Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44


-------- Original Message --------
>Subject: Re: [RE-wrenches] Padded equipment cases.
>From: Kent Osterberg <kent at coveoregon.com>
>Date: Fri, August 13, 2010 12:27 am
>To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
>
>Years ago, I used to get custom cases made by Silton Company.  They are now 
>owned by Olympic Case Company but the facility in Fresno is still in use.
>
>Kent Osterberg
>Blue Mountain Solar
>
>
>Peter Parrish wrote: 
>I seem to remember reading about a source of "custom padded equipment
>>cases", but can't remember when and where I did so. What I am talking about
>>is a sturdy (e.g. Al) case with closed cell foam in the top and bottom
>>halves and then a third inner 2" or 3" layer of foam with cutouts for
>>sensitive equipment. I am thinking of our DayStar irradiance meter, our
>>SunEye, DMM, IR thermometer, clamp-on ammeter, digital camera and the like.
>>
>>I am not interested in buying a "kit". I would like to specify the outlines
>>for each piece of equipment and have the cutouts done in a professional
>>manner.
>>
>>Has anyone ordered one or know of a source?
>>
>>- Peter
>>
>>
>>Peter T. Parrish, Ph.D., President
>>California Solar Engineering, Inc.
>>820 Cynthia Ave., Los Angeles, CA 90065
>>CA Lic. 854779, NABCEP Cert. 031806-26
>>peter.parrish at calsolareng.com  
>>Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
>>
>> 
>>
>>
>>_______________________________________________
>>
>>
________________________________
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100813/c7d66269/attachment-0004.html>