[RE-wrenches] Interstate UL-16 HC problem

bob reellison at gmail.com
Wed Jun 30 05:19:18 PDT 2010


We have been there, and are doing the discharges and EQ's. 

Actually you have to be in float to get the eq to come on but your procedure
might work, never tried it that early in the charge process.

 

Thanks,

Bob

 

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jeff Oldham
Sent: Tuesday, June 29, 2010 3:04 PM
To: re-wrenches at lists.re-wrenches.org
Subject: Re: [RE-wrenches] Interstate UL-16 HC problem

 

IMHO Interstate makes a decent battery. It sounds like to me that you are
not Equalizing but just trying to BULK. You'll need at least one robust EQ
cycle to bring the SG's in line and likely 2-3 a couple of days apart. At
least the Magnum's of a couple of years ago are not intuitive to get into
EQ, as I recall you need to 1st be in BULK charging before it can be set to
EQ and this is/was done by holding down the "Charger" button until it moves
into EQ. Wrenches please correct my fading memory if this is not correct. I
would get the V to 62-63 and hold it there for 3-4 hours and then recheck
your SG and see if further EQ's are in order.

Good luck!

-jeff o


>From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative
SOLutions



____________________________________________________________
 <http://thirdpartyoffers.juno.com/TGL3132/4c2a4411d2a3be9b2ast01vuc> Penny
Stock Jumping 2000%
Sign up to the #1 voted penny stock newsletter for free today!
 <http://thirdpartyoffers.juno.com/TGL3132/4c2a4411d2a3be9b2ast01vuc>
AwesomePennyStocks.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100630/5e76a50e/attachment-0004.html>


More information about the RE-wrenches mailing list