[RE-wrenches] Apollo T80HV

Darryl Thayer daryl_solar at yahoo.com
Mon Apr 19 07:25:32 PDT 2010


Hello 
I have used the T80HV and no problems.  HOwever I am not as close to the limit as you are.  My app exceeded the T80 and Flexmax 80 voltage limits, it has been awhile and I do not remember the exact specs.   I also just accept the data it presents, I have no indication that it is inaccurate.
Darryl   

--- On Sun, 4/18/10, Dave Palumbo <dave at independentpowerllc.com> wrote:


From: Dave Palumbo <dave at independentpowerllc.com>
Subject: Re: [RE-wrenches] Apollo T80HV
To: "'Wrench List'" <re-wrenches at lists.re-wrenches.org>
Date: Sunday, April 18, 2010, 8:12 PM








Looking for comments on the Apollo T80HV charge controller. 
We require a MPPT controller that will accept up to 3 Sanyo 215N’s in series (194Voc / 157Vmp with 1.25 factor). To my knowledge this is the only controller that will do the job. This HV Apollo is publishing it’s Max Voc at 200 and Max operating voltage at 160 volts.
 
Also if you have comments on the built in energy monitoring function in the Apollo T80HV. Uses Bogart Engineering technology for amp hour, or watt hour, battery state of charge.
 
I have been waiting on MidNite’ Classic beta units for quite a while and have no idea when their final product will be available.
 
Thanks,
Dave
 
David Palumbo, NABCEP Certified PV Installer
Independent Power LLC
Offices in Lamoille and the Champlain Valley
802.888.7194 
www.independentpowerllc.com 
 
-----Inline Attachment Follows-----


_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org




      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100419/a27912d8/attachment-0004.html>


More information about the RE-wrenches mailing list