[RE-wrenches] Need PE for Bergey tower wet stamp

[Kelly Keilwitz]

Hi Darryl,
Most tower companies should supply the structural and foundation design and
engineering. The only engineering the installer should need to provide is
geotechnical (soils). If the soils are not within the strength parameters
that the tower foundation is designed for, you may then need to pony up for
foundation re-engineering.

Best,
-Kelly

Kelly Keilwitz, P.E.
Whidbey Sun & Wind, LLC
Renewable Energy Systems
NABCEP Certified PV Installer
WA Electrical Administrator #KEILWKM923RB
987 Wanamaker Rd.
Coupeville, WA, 98239
360.678.7131
sunwind at whidbeysunwind.com
WA Electrical Contractor #WHIDBSW920MS
WA General Contractor #WHIDBSW946M1



On 2/24/10 3:34 PM, "Darryl Thayer" <daryl_solar at yahoo.com> wrote:

> HI all
> I have a AHJ problem in that he wants to have the tower diagram wet stamped by
> a Minnesota PE does anyone have any suggestions?  I cant seem to find anyone
> with tower experience.
> Darryl
> 
> 
>       
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
>