[RE-wrenches] single string of batts: must the interconnects beinverter size cables?
Warren Lauzon
windsun at wind-sun.com
Sat Feb 20 11:44:00 PST 2010
Just for info, here is a good example of how and how not to wire up
batteries for balanced amperage draw
http://www.smartgauge.co.uk/batt_con.html
..................................................................................................
Northern Arizona Wind & Sun - Electricity From The Sun Since 1979
Solar Discussion Forum: http://www.wind-sun.com/ForumVB/
..................................................................................................
----- Original Message -----
From: "Doug Wells" <dwells at thesolarspecialists.com>
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
Sent: Saturday, February 20, 2010 7:15 AM
Subject: Re: [RE-wrenches] single string of batts: must the interconnects
beinverter size cables?
>I have always used 4/0 through out the bank.
> I guess that I have had to replace to many dead batteries at this point.
> If you are under sizing the parallel strings, what happens when a cell
> fails? or 2 cells fail.
> Now all the current would be carried by one string.
> If you are running equal lengths to a buss bar, it might make sense to
> put a current limiting fuse on each parallel run before the bus.
> However, this would pretty much negate any money save on downsizing the
> copper.
> So what is really gained?
>
> Doug Wells
> The Solar Specialists
> Morrisville, VT 05661
> (p) 802-223-7014
> (c) 802-498-5856
> www.thesolarspecialists.com
>
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list