[RE-wrenches] Code switch heights

Peter Parrish peter.parrish at calsolareng.com
Fri Nov 26 18:03:50 PST 2010


I believe anything operable needs to be within 2’6” lower and 6’6” upper.

 
Peter T. Parrish, Ph.D., President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
CA Lic. 854779, NABCEP Cert. 031806-26
peter.parrish at calsolareng.com  
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885

 
________________________________________
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of bob ellison
Sent: Friday, November 26, 2010 4:11 PM
To: 'RE-wrenches'
Subject: [RE-wrenches] Code switch heights

I am looking at installing 4 inverters in a system, 1 on an e panel and 2 SW
4048’s and also a SW plus. So its an interesting mix, 3 are just to cut the
generator run time for the diesel generator.

I am trying to find the allowable range for switch heights for all the gear.
Seems the upper limit is about 6’ but I am unsure on the lower limit.

Any ideas?

Thanks,
Bob Ellison
________________________________________
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1170 / Virus Database: 426/3281 - Release Date: 11/26/10




More information about the RE-wrenches mailing list