[RE-wrenches] Fwd: Outback Grid Problems
jay peltz
jay at asis.com
Mon Apr 5 15:17:18 PDT 2010
HI Steve,
Is there a logic to the change between < 75 and 76> regarding loss of temp comp for Sell RE?
thanks,
jay
peltz power
On Apr 5, 2010, at 2:11 PM, Steve Higgins wrote:
> Sell RE and Refloat are not Temp Compensated,
> Absorb, Float Voltages and EQ are temp Compensated.
>
> Older Grid tie inverters using firmware revision 75 utilized temperature compensated voltage with the Sell RE, but new versions such as 76 and above don’t.
>
> “2)What is the difference between refloat and rebulk?”
>
> For the purpose of the GT units, it’s really the same. Just when Refloat, is triggered it’s basically going into a Re-bulk mode.
>
> Steve Higgins.
> Sr Application Engineer.
> Sub-Saharan Africa Business Dev Mgr.
> Outback Power Systems.
> 19009 62nd Ave Ne
> Arlington Wa 98223
> 360-618-4313
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100405/62667981/attachment-0003.html>
More information about the RE-wrenches
mailing list