[RE-wrenches] Peel-n-stick Uni-Solar: were these ever made in 5' length?
Warren Lauzon
windsun at wind-sun.com
Sun Mar 21 18:53:24 PDT 2010
The US-64's were on their site for 3+ years after they discontinued them. They don't keep it updated very well.
I believe the main reasons the peel and stick were discontinued was high failure rates, high temperature losses (due to very little heat/air dissapation), and the difficulties in removing and replacing bad panels. Cost was also a factor - on the order of $8-10 per watt.
..................................................................................................
Northern Arizona Wind & Sun - Electricity From The Sun Since 1979
Solar Discussion Forum: http://www.wind-sun.com/ForumVB/
..................................................................................................
----- Original Message -----
From: Drake Chamberlin
To: RE-wrenches
Sent: Sunday, March 21, 2010 8:13 AM
Subject: Re: [RE-wrenches] Peel-n-stick Uni-Solar: were these ever made in 5' length?
At 11:02 AM 3/20/2010, you wrote:
the whole peel-n-stick product line seems to be no more. Is that right?
They still have them on their web site. http://www.uni-solar.com/uploadedFiles/PVL-136EN%28AA4-3697-04%29.pdf
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100321/18815419/attachment-0003.html>
More information about the RE-wrenches
mailing list