[RE-wrenches] Mounting Temperature Sensors

[Glenn Burt]

Hello Wrenches,

 

Does anyone have any good ideas for mounting thermocouples or RTD's to the
back of modules for cell temperature measurements?

I've seen electrical tape used (obviously the results were terrible),
thermally conductive epoxy from Omega Instruments ($$) used, some kind of
foil tape (electrically questionable).

 

Any recommendations?

Bubble gum?

 

Glenn Burt

NABCEP Certified PV Installer

NYSERDA Eligible Installer

 

Technical Specialist

Alteris_RGB.gif
Alteris RenewablesT
120 Broadway
Albany, NY 12204

Tel:    (518) 512-5154
Cell:   (518) 681-2274
Fax:   (518) 514-1175
Web:  <http://www.alterisinc.com> www.alterisinc.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100806/facc265f/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 6567 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20100806/facc265f/attachment-0005.png>