[RE-wrenches] Nec 225

[William Miller]

Dick:

I too am mystifed.  I sent a request for clarification but have not  
heard back.  It may be some kind of power trip as we have been at odds  
over many issues.  I will report back.

William Miller
Millersolar.com

On Dec 11, 2009, at 6:05 PM, Richard.L.Ratico at VALLEY.NET (Richard L  
Ratico) wrote:

> William,
>
> No direct specific experience with this, but, respectfully, what is  
> the problem?
> The code sections seem clear and not unreasonable nor arduous.
>
> Dick Ratico
> Solarwind Electric
>
>
> --- You wrote:
> Friends:
>
>
> I just received a plan correction for a grid-tie permit application  
> wherein
> the inspector is questioning compliance with section 225.  Below is  
> the
> text of the correction notice:
>
> The existing panel C in the pump house must comply with NEC 225.31. 225.32
> & 225.33. Show the number of existing circuits and/or the  
> disconnecting
> means for panel C.
>
> Has anyone ever had experience with this section being applied to a
> grid-tie system?  The inverters will be inside a pump house remote  
> from the
> main residence.
>
> Thanks in advance.
>
> William Miller
>
> --- end of quote ---
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>