[RE-wrenches] Outback BOS

[jay peltz]

Hi Guys, and thanks,

It was what I sort of thought but just couldn't prove.
The metal is just too thick for the CBI breakers.

thanks again,

jay
peltz power

On Oct 25, 2009, at 9:52 AM, Wind-sun.com wrote:

> In theory, all DIN rails should be the same, there are only two  
> generally used industry sizes, and 99% of those are the 35mm.
>
> The problem we have seen on a very few is that the lip and/or the  
> metal itself that it is stamped out of is too heavy, so it won't fit  
> into the little slots on the item to be mounted. I vaguely recall  
> that some older Square-D breakers were not really DIN rail, they  
> used their own odd size, 37mm or so, but that was like 20 years ago.
>