[RE-wrenches] SS Tek Crews
Allan Sindelar
allan at positiveenergysolar.com
Fri Oct 23 14:49:39 PDT 2009
The pull-out strength depends primarily on the gauge of the purlin. A #14,
which I believe equals ¼, ranges from 141 lbs (26 ga) to 4,550 lbs (3/16
plate), according to Dynamic Fasteners catalog, page 67..
Allan Sindelar
Allan at positiveenergysolar.com
NABCEP Certified Photovoltaic Installer
EE98J Journeyman Electrician
Positive Energy, Inc.
3201 Calle Marie
Santa Fe, New Mexico 87507
505 424-1112
www.PositiveEnergySolar.com <http://www.positiveenergysolar.com/>
One must wonder if the pull-out resistance of the 1/4" Tek screw is adequate
for the wind-loading etc. There's some math to be done which may point to
the need for bigger diameter screws anyway.
Jolliness,
Mick Abraham, Proprietor
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20091023/b85afcdc/attachment-0004.html>
More information about the RE-wrenches
mailing list