[RE-wrenches] BIPV

[Joel Davidson]

Re: [RE-wrenches] max PV voltage in CanadaDana,
Solar Integrated Technologies single-ply PVC roofing with integrated Uni-Solar PVL136 laminates is good for 1-1/2:12 roofs. SIT did a flat roof in Rochester, NY in 2005 that has gone through 4 years of heavy snow. Uni-Solar peel-and-stick can also be used on low-slope roofs. Powerlight has done at least 1 low-slope PowerGuard array on a commercial roof in Boston using glass laminates.
Joel Davidson
  ----- Original Message ----- 
  From: Dana 
  To: 'RE-wrenches' 
  Sent: Monday, August 31, 2009 12:35 PM
  Subject: [RE-wrenches] BIPV


  Any thought out there on a BIPV minimum roof angle?

   

  Would you do this in Snow country?

   

  Dana Orzel

   

  Great Solar Works, Inc

  www.solarwork.com

  E - dana at solarwork.com

  V - 970.626.5253

  F - 970.626.4140

  C - 970.209.4076

  "I'd put my money on solar energy. I hope we don't have to wait 'til oil and coal run out before we tackle that."

  -Thomas Edison, in conversation with Henry Ford and Harvey Firestone, March 1931

   



------------------------------------------------------------------------------


  _______________________________________________
  List sponsored by Home Power magazine

  List Address: RE-wrenches at lists.re-wrenches.org

  Options & settings:
  http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

  List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

  List rules & etiquette:
  www.re-wrenches.org/etiquette.htm

  Check out participant bios:
  www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090831/3dc48a21/attachment-0004.html>