[RE-wrenches] solar roof lift experience?

[Matt Lafferty]

Hi Ron,
 
The difference between the one you're using and the ones we use is that ours
have a full metal body, not ABS. Call me paranoid, but I feel better about
steel & brass hardware swinging stuff overhead than I do plastic. For
general handling and positioning of modules, I'm sure the ones you're using
are totally adequate. 
 
-Matt Lafferty
 
  _____  

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Ron Young
Sent: Wednesday, August 19, 2009 11:16 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] solar roof lift experience?


I got a far better price on these ($49.95 ea.) from
http://www.texastooltraders.com/Shop/Control/fp/SFV/32723, they're made by
powr-grip, I'm sure they're the same thing mcmaster is selling.  

Ron Young
earthRight - Solareagle.com

On 12-Aug-09, at 1:48 PM, Ron Young wrote:




From: Matt Lafferty <gilligan06 at gmail.com>
Date: August 12, 2009 1:45:28 PM PDT (CA)
To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] solar roof lift experience?
Reply-To: gilligan06 at gmail.com, RE-wrenches
<re-wrenches at lists.re-wrenches.org>

<snip>


If you pre-panelize in the shop, then use glazer's lifting suction cups to
fly 3 or 4-module panels one at a time. McMaster-Carr Part #53615A13.
Catalog page 1458. http://www.mcmaster.com/#suction-cups/=35r4ht  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090822/26a5b713/attachment-0004.html>