[RE-wrenches] Power Factor

[Darryl Thayer]

HI The power factor is set by the inverter.  The modules are unity as there are DC.  but the inverter is very close to unity.  The couple of times I tried to measure power factor I got Unity.  But I would think the load may affect the inverter power factor.
Darryl 

--- On Wed, 7/29/09, Ron Young <solareagle at solareagle.com> wrote:

> From: Ron Young <solareagle at solareagle.com>
> Subject: [RE-wrenches] Power Factor
> To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
> Date: Wednesday, July 29, 2009, 7:45 PM
> Can anyone point me in the
> direction to find the power factor for Sanyo HIT N 205
> panels? The utility is requesting it on a net metering
> interconnection application.  
> Ron YoungearthRight Products -
> Solareagle.com
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
>