[RE-wrenches] module frame separation

[Chris Daum]

Not meaning to open up a can of worms, but along these lines, what do y'all
think of the way Sharp frames are connected/sealed? 

Chris Daum
Oasis Montana Inc.

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Doug Wells
Sent: Wednesday, June 24, 2009 7:20 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] module frame separation

William,

I have done the procedure before.
I used RTV silicone.
The hard part was cleaning out some of the old sealant in the frame.
After seeing enough modules that look like they were sealed by preschoolers,
you might end up with a longer lasting seal than the manufacturer.

Doug Wells
The Solar Specialists
Morrisville, VT 05661
(p) 802-223-7014
(c) 802-498-5856
www.thesolarspecialists.com