[RE-wrenches] Design help for solar water pumping application

Mark Dickson mark at OasisMontana.com
Thu Jun 11 13:15:06 PDT 2009


Hi Lee, 

I would think a "snap-shut" valve, such as a Hudson valve in each tank and a
pressure switch hooked up to the float terminals on the controller would
work well in this situation.

 

Good luck!

 

Mark Dickson

Oasis Montana Inc.

 <http://www.oasismontana.com/>  <http://www.oasismontana.com/>
www.oasismontana.com

 

www.grid-tie.com <http://www.grid-tie.com/> 

 

 <http://www.pvsolarpumps.com/>  <http://www.pvsolarpumps.com/>
www.PVsolarpumps.com 

  _____  

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Lee Bristol
Sent: Thursday, June 11, 2009 1:26 PM
To: RE-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] Design help for solar water pumping application

 

Solar Water Pumping Wrenches,

 

We normally don't do solar water pumping but a friend asked for some help
designing his system.  He has one well and two 5,000 gallon reservoirs to
fill up.  The average usage is expected to be about 2,000 gallons per day
but may be higher in the summer.  The tanks will have level detector
switches to sense when the tank is full.  The site is near Leesburg, VA.

 

The problem is to design a control system to turn on the pump when one or
both of the tanks needs water and to shut it off when both are full.  The
closest tank has a head requirement of 200 feet (pump to tank) and is 300
feet from the well head.  The second tank head requirement is 220 feet and
it is 3,000 feet from the well.  The pipes are expected to be 1.25 or 1.5
inch.

 

A Grundfos SQFlex 6 SQF-2 pump with 1.36 KW solar was recommended, 360 foot
head, 360 gph.  I think that this would provide the lift but not the
quantity.  Hmmmm, what valves and controls would you all suggest?

 

Thanks!


Lee


-- 
Lee Bristol
NABCEP Certified Solar Designer/Installer

Chief Technology Officer
Standard Solar, Inc.
202 Perry Parkway, #7
Gaithersburg, MD 20877
(301) 944-5105
(240) 479-1510 (c)
www.standardsolar.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090611/563b9f29/attachment-0004.html>


More information about the RE-wrenches mailing list